Solved: Dyson Airwrap Blinking Red/White And How to Fix It (Find Out) (2024)

Having the Dyson Airwrap blinking red or white light isn’t a huge problem. But you sure need to fix it. But why does your Dyson Airwrap blink red or white light? This is because it’s time to clean the filters. Whether it blinking red or white ( depending on which generation you have), you need to clean the filters of your beloved hair tool.

In this blog post, we will go through each step and provide clear instructions on fixing the blinking issue and getting your Dyson Airwrap running like new again. We’ll also provide tips on how to prevent future issues from occurring.

This guide is for everyone, whether a first-time user or an experienced pro. Let’s get started!

Understanding a Dyson Airwrap’s Blinking Red/White Pattern

Many people own the Dyson Airwrap, a hair styling tool that uses advanced airflow technology to curl, wave, or smooth hair. This amazing device has an impressive array of features, but unfortunately, all those features mean you may run into problems occasionally. One common issue is the device’s blinking red and white light pattern.

The cause is that the air filters are dirty, with too much debris stuck in the filter mesh. And rarely means to a more serious issue like an internal malfunction that requires professional repair or service.

Checking Your Dyson Airwrap for Debris Buildup

If your Dyson Airwrap blinking red and white, the filters must be cleaned thoroughly.

If the Dyson Airwrap isn’t working properly and is blinking red/white, it’s time to check for debris buildup. This issue can occur occasionally and is easily resolved with a few simple steps. And, happily, the process doesn’t require any specialized tools or intense cleaning products.

Here’s how you can fix debris buildup on your Dyson Airwrap:

1. Unplug the device.
2. Turn it over so the device’s base faces up, and gently remove the filter cover.
3. Take out the filter and check for any debris or dust buildup (if there is some, use a soft-bristled brush to whisk away any debris gently).
4. Reinstall the filter and filter cover.
5. Plug in your Dyson Airwrap – it should now be working properly!

If you take care of your device regularly by cleaning out dust and dirt, you’ll reduce the chances of running into this issue again in the future!

For some reason if this still doesnt fix the issue, don’t panic though; it’s actually quite easy to troubleshoot and remedy the problem. Here are some simple other tips and tricks you can try:

• Check the filters: Make sure they are clean, not clogged, and replace them if needed.
• Empty the dust bin: Check and empty it if necessary.
• Charge the machine: If your airwrap is blinking red and white, try charging it before using it again.
• Reset power: Try resetting the power by turning off the machine at least 5 seconds before turning it back on.
• Remove stuck objects: If there are any stuck objects in the airwrap like hair or debris, remove them to see if that fixes your issue.
• Return it for a new one: If none of these measures work, then you will need to return or exchange your airwrap for a new one.

Diagnosing The Problem And Potential Solutions

If you’re still encountering the blinking red and white light on your Dyson Airwrap even after cleaning the filters, it’s likely an issue with one of three possible components: the power supply, the power switch, or the temperature sensor.

Diagnosing the problem can be tricky, especially if you’re a novice when it comes to fixing technical equipment. Start by examining each possible component:

Power Supply

Check that your Dyson Airwrap is connected securely to a working outlet and ensure that the power cord is properly plugged in.

If this doesn’t resolve your problem, you may need to replace the power supply. You can sometimes do this yourself, but if it’s out of warranty, you may want to rely on a professional repair person who has experience with this type of product.

Power Switch

Unplugging and plugging your appliance back in may sometimes be enough to reset the power switch and resolve the issue. If not, you may need to replace it altogether – use caution when doing this as it requires special tools and knowledge of appliance wiring regulations before attempting a DIY fix.

Temperature Sensor

The temperature sensor regulates how much heat is generated during use and is responsible for shutting off the product automatically once it reaches a certain level of heat.

Try manually resetting the temperature sensor by pressing its button for five seconds before attempting a replacement – if you decide to replace this component yourself, follow safety instructions carefully as incorrect wiring can cause harm.

Tips For The Smoothest Styling Performance

Using the Dyson Airwrap for styling can be a great experience, but it’s important to make sure you follow the right tips and tricks to get the best performance. Here are some of our top recommendations:

1. Use the Right Attachment – When using the Dyson Airwrap, you must use the right attachment for your hair type and hairstyle. For example, if you have thicker or coarser hair, you might want to start with the larger barrel attachments.
2. Set the Temperature – Depending on your hair type, it’s important to set the temperature correctly when using your Dyson Airwrap. If you have thin or fine hair, you should use a lower temperature setting, while if your hair is thick or curly, then a higher temperature may be necessary for proper styling.
3. Getting Even Coverage – When curling or straightening your hair with the Dyson Airwrap, ensure you pull the hair at a consistent rate and in small sections. This will help ensure that all of your locks are evenly styled from top to bottom.
4. Don’t Overheat Your Hair – It’s important not to overheat your locks during styling as this can cause damage and breakage in the long run. Immediately turn it down if you notice any smoldering smell coming from your scalp after using a high-temperature setting on your Dyson Airwrap.

Common Issues With The Dyson Airwrap

If you’ve noticed your Dyson Airwrap flashing red and white, then it’s likely that this issue is related to one of the three common problems with this popular styling tool.

Dirty Filter Screen

The filter screen at the back of your Dyson Airwrap may become blocked over time due to the collection of dust and dirt particles. To clean it, simply remove the filter and wipe away any visible debris.

Poor Connection

The connection between your Dyson Airwrap and power supply could be loose or faulty. Try unplugging it from the wall and then reconnecting it firmly. If that doesn’t do the trick, you may need to replace your power supply with a new one.

Low Battery Life

If your Dyson Airwrap is not in use for an extended period, its battery life can diminish. To remedy this, charge the battery until it is full before use as per manufacturer guidelines.

By following these steps, you should be able to get your Dyson Airwrap up and running again in no time!

Interesting Dyson Facts

• James Dyson, the founder, is a very hands-on engineer passionate about improving everyday products.
• The company invests heavily in research and development, and they have a large team of engineers working on new products.
• Dyson products tend to be more expensive than many other brands.
• They are a premium brand for people looking for the latest technology and design.
• Dyson is a company constantly pushing the boundaries of what’s possible in appliance design.
• They are a very brand-conscious company, and they invest heavily in marketing.

FAQs

Why Is My Dyson Airwrap Blinking Red And White While Charging?

There may be an issue with the charging cable or battery.

Try replacing the charging cable first; if that doesn’t work, you may need to replace the battery.

How Do I Prevent My Dyson Airwrap From Overheating And Blinking Red And White During Use?

To prevent overheating, allow the Airwrap to cool down between uses and avoid using it for extended periods of time.

Ensure the filter is clean and the attachments are properly used.

Can I Fix A Dyson Airwrap That Is Continuously Blinking Red And White Myself?

A system error may require professional repair or replacement if your Dyson Airwrap is continuously blinking red and white.

It is not recommended to attempt to fix this issue yourself, as it may cause further damage to the device. Contact Dyson customer support for assistance.

Conclusion

• In conclusion, if you have a Dyson Airwrap blinking red and white simultaneously, the issue could be caused by a range of things, from blocked air vents, dust accumulation, or a faulty power adapter.
• When using the Dyson Airwrap, you must use the right attachment for your hair type and hairstyle.
• Fortunately, all of these issues are relatively easy to diagnose and resolve, and the best way to do so is to run through the methods suggested in this article.
• Following the steps outlined above, you should have your beloved Airwrap up and running again quickly.

Other Articles

• Reasons Why Geometry Dash Won’t Open on an iPhone (Fix)
• Can You Exercise With AirPods Max? (Must Know)
• Wrong Date on Vizio TV [Fix It Now]